ChemSet™ 801

ChemSet™ 801 Heavy duty anchoring of threaded studs and reinforcing bar into solid concrete, solid brick and stone. Two component, alkaline resistant Vinyl Ester. Tough and reliable for extra security. High bond strength for diamond and carbide drilled holes. Steel beams and columns, heavy plant, safety barriers, reinforcing bars, timber frame hold down FEATURES & BENEFITS New fast cure vinyl ester Carbide and diamond core drilled holes – strong bond Excellent alkaline resistance Suitable for use in contact with drinking water Sag resistant formula for horizontal holes Easy cold weather dispensing Styrene Free INSTALLATION GUIDE 1. Drill or core hole to specified diameter and depth 2. Remove dust and debris by brushing and blowing 3 times each ( If hole is wet or flooded remove water with wet/ dry vacuum) 3. Screw mixing nozzle onto cartridge and dispense 2-3 trigger pulls of adhesive to waste until colour is dark grey with no streaks 4. Insert tip of nozzle to bottom of hole and dispense adhesive 5. Fill hole to about 2/ 3 full 6. Insert threaded stud or reinforcing bar with rotating motion to release trapped air 7. Wait until adhesive has fully cured before loading ( see Working / Loading Time chart below) 9. Clean up with acetone